top of page

Load data for .300 AAC Blackout + .308 | 125gr | Sierra HPMK

Recommended Powder(s): Hodgdon LilGun, Lovex S040

.300 AAC Blackout + .308 | 125gr | Sierra HPMK

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 125gr | Sierra HPMK
Manufacturer SKU:
2121
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.180" | 30.0mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.321" | 8.2mm
Shank Seated Depth:
0.321" | 8.2mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B5863_C348
Last updated:
2025-02-02

Load data for 24 loads in caliber .300 AAC Blackout with .308 | 125gr | Sierra HPMK bullet and 12 powders such as Hodgdon LilGun, Lovex S040. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 14.8 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
96%
42757
84%
**51
98%
[Accurate 5744]*
<<locked>>
95%
45194
89%
**46
92%
Accurate No. 11 FS
<<locked>>
96%
44802
88%
**52
96%
Hodgdon LilGun 👍
<<locked>>
96%
49342
97%
**00
100%
[Lovex D060]*
<<locked>>
96%
42714
84%
**10
92%
[Lovex D063]*
<<locked>>
96%
47645
94%
**69
93%
Lovex S040 👍
<<locked>>
93%
47790
94%
**33
100%
Lovex S053
<<locked>>
97%
31053
61%
**59
95%
SNPE Vectan BA6 1/2
<<locked>>
96%
28834
57%
**67
100%
[Shooters World Blackout]*
<<locked>>
96%
47645
94%
**69
93%
[Shooters World Buffalo Rifle]*
<<locked>>
96%
42714
84%
**10
92%
Vihtavuori N110
<<locked>>
95%
35462
70%
**31
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
27630
54%
**95
93%
[Accurate 5744]*
<<locked>>
90%
38580
76%
**41
90%
[Accurate No. 11 FS]*
<<locked>>
81%
27427
54%
**54
90%
Hodgdon LilGun
<<locked>>
81%
29312
58%
**11
99%
[Lovex D060]*
<<locked>>
92%
38580
76%
**41
90%
[Lovex D063]*
<<locked>>
91%
40234
79%
**64
91%
Lovex S040
<<locked>>
81%
33997
67%
**36
99%
[Lovex S053]*
<<locked>>
85%
22597
45%
**62
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
19740
39%
**47
97%
[Shooters World Blackout]*
<<locked>>
91%
40234
79%
**64
91%
[Shooters World Buffalo Rifle]*
<<locked>>
92%
38580
76%
**41
90%
Vihtavuori N110
<<locked>>
81%
23409
46%
**91
97%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page